Aquarium Wave Maker Marine Wireless Master Slave Pump Control Circulation Tools

Description

Aquarium Wave Maker Marine Wireless Master Slave Pump Control Circulation Tools
Description
The wave-making pump is good at making waves and it is spectacular to watch. In fact, they can only push up and down a part of the water in the fish tank from the vertical direction. In the horizontal direction, the driving force is rather weak, especially near the bottom of the tank, and almost no water flow can occur. as the picture shows
Cross flow technology
Flow coverage is almost no dead ends
Slow flow rate through the cylinder
The flow of water rebounds from the cylinder wall at the other end to form a "circulation"
Traditional technology
1. There is more dead space in the flow of water
2. The water flow in the middle of the cylinder is too strong
3. The water flow at the other end of the cylinder is very weak
SPPED: Adjusting Traffic Size
FEED: feeding mode
H: Fixed flow mode
W1: Classical Flow Mode
W2: Positive Reversal Mode
W3: Fixed Program Flow Model
MODE: switch mode
Warning: The light indicates that the work is abnormal. Please restart after handling the fault.
P&N button: Set the direction of flow
LOCK: lock wave
After feeding mode
The submersible pump will stop working and the timer will be fed for ten minutes to allow the body of water to stand still for the fish to eat. Ten minutes later, the submersible pump will automatically start working.
Four flow modes
The four modes of operation can produce a uniform stream of water that will produce a flow of water throughout the tank and a variety of coral foraging will reach the highest
First deduct the buckle
Do not use excessive force to avoid breaking
Axis pushes out toward the opening
Remove the rotor and motor section
Check whether there is debris in the rotating leaves
Left and right side can remove the impeller
Package Includes:
1 x Aquarium Wave Maker